Bobrick B-543 toilet paper roll holder available in 2 versions of stainless steel (2025)

Bobrick B-543 toilet paper roll holder available in 2 versions of stainless steel

Satin-finsih stainless steel. Threaded Ԁange conceals mounting plate, provides snug fit to the wall. Accepts standard-core size from 3⁄4" (20mm) up to 1 1⁄2" (40mm) and 4" (100mm) wide. Set screw in post prevents vandalism. Flange width 2" (50mm). Overall width 5 1⁄2" (140mm). Height 4 1⁄2" (115mm). Unit projects 1 5⁄8" (35mm) from wall.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8") toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured. Available in 2 Versions, satin brushed or polished finish stainless steel.

Dimensions:
width: 140 mm
height: 115 mm
depth:33 mm
Typical mounting height: 597 mm

- Toilet Tissue Dispenser shall be type-304 stainless steel (insert one satin finish or bright polished) finish.
- Toilet Tissue Dispenser shall have 19mm (3/4") diameter Post.
- Dispenser bar shall be 9.5mm (3/8") diameter, secured to Post with a concealed set screw allowing for right or left handed assembly.
- Retaining pin shall be 6.4mm (1/4") diameter and pressed into Dispenser bar.
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- Post and mounting flange are to be machined as one piece.

Data sheet

• Abmessungen: Breite: 140 mm Höhe: 115 mm Tiefe: 33 mm
• Typische Montagehöhe: 597 mm
• WC-Rollenhalter aus AISI 304 (V2A) Edelstahl, Oberfläche matt gebürstet.
• Die verdeckte Wandhalterung (5,6 mm stark, Ø 45 mm) ist mit zwei Schraublöchern zur Wandbefestigung versehen sowie einem Außengewinde zur Aufnahme der Abdeckrosette (1,4 mm stark, 13 mm teif, Ø 50 mm), welche mit der Wandhalterung verschraubt wird.
• U-förmiger Bügel (9,5 mm stark) ist im Träger gelagert und durch Madenschraube fixiert.
• Dorn ist mit Bügel fest verpresst.
• Erhältlich in 2 Varianten